• 2004 Driltech T25K5W:
• Mounted on a 2004 Sterling 9513 Truck (12,500 miles)
• 355 HP Diesel Engine
• Diesel Deck Engine:  CAT C-15 (Tier II) 521 HP @ 1,800 RPM (895 hours)
• Air Compressor:  Sullair 1000 CFM / 350 PSI
• Pullback, 30,000 Lbs., 28' Head Travel
• Pipe Rack holds 15 Drill Pipes (4 1/2" OD X 20')
• Drill Pipe Loader for 6 pipes
• Remote Helper's Station
• Rotary Head, 89 RPM, 72,600 in Lbs. Torque
• Jib Boom, Hydraulic Extend with 180ƒ Swing Winch, Hydraulic 8,000 Lb. Capacity w/ 100¹ Non-Rotating Wire Rope
• Drill Table, 20" Opening with Hydraulic Adjustment
• 36² Jaw Wrench w/Supports
• 20 GPM Water Injection
• DTH Lubricator, Includes 10 Gallon Tank
• Fine Feed and Torque Controls
• Night Lights
• (21) Used Drill Pipes (4 1/2" x 20') available
• Paint:  White Truck & Drill
• FOB: N.W. Region, USA  
• PRICE: Please contact us for more information.

• 1993 Driltech T25K3W:
• S/N: 731835
• Sullair 900 cfm / 350 psi compressor
• CAT 3406 diesel deck engine (rebuilt Turbo)
• 25,000 lbs Pullback
• Hammer Oilier
• CAT 1010 Water injection
• Drill Pipe (20¹ X 4 1/2" X 3 1/2")
• Rebuilt Control Panel, Spool Values, and some Hoses replaced, etc.
• New Paint and Full Service included
• Mounted on a Ford L 9000 truck
• VIN# 1FDZW90T5PVA03585
• 17,968 miles on gauge (low miles)
• CAT 3306 diesel engine (Rebuilt 0 Hours)
• FOB: Mifflinburg, PA
• PRICE: Please contact us for more information.

• 1985 Rebuilt TAMROCK DRILTECH - T 60K II L - DHIII:
• Completely Rebuilt in 2002
• Rotary capacity: 9 7/8" - 10 5/8"
  
  Truck
• Engine Diesel: CATERPILLAR, 3406B DITA 242 kW
• Model: Crane Carrier 8 x 4, Federal Motors 8 x 4
• Front axle: 40.000 Lbs
• Rear axle (tandem): 80.000 Lbs
• Fuel capacity: 380 litres
  
  Drill
• Engine Diesel: CATERPILLAR, 3408 DIT 354 kW
• Push power: 60,000 lbs (27.240 kg)
• Pullback: 35.000 lbs
• Feed rate: 0 - 60 fpm
• Hoist rate: 0 - 115 fpm
• Stroke: 34'
• Change of casing
• Pipe: 27 1/2" (standard)
  
  Rotary System
• Type: hydraulic transmission
• Speed: 0 to 106 (standard)
  
  
• Loader pipes: carousel system
  
  
• Air System: standard 1250 cfm / 100 psi air compressor SULLAIR
  
  Water Injection System
• Incorporated
  
  Levelling Jacks
• Number: 2 rear - 1 front
• Lift capacity: (Each one) 50.000 lbs (22.700 kg)
• Safety valves: incorporated
  
  Equipment Sizes
• Length: 13475 mm
• Width: 3350 mm
• Height: 4300 mm
• Weight: 39870 kg
  
  Accessories
• 3 pipes: 7 5/8" - 9,6 m length
• 1 tricone: 250 mm (9 7/8")
• 1 tricone adapter: 1000 mm (pipe/tricone)
  
  
• PRICE: Please contact us for more information.

• 1986 Driltech DK40-HP:
• CAT 3406 deck engine with 6,167 hours
• Sullair 750 cfm / 350 psi compressor
• Water Injection
• Oiler
• Federal Truck
• CAT 3208 engine
• The carousel holds (6) rods (4 1/2")
• FOB: Mid-West, USA
• PRICE: Please contact us for more information.

• 1985 Driltech D25K:
• Sullair 750 cfm / 350 psi compressor
• CAT 3406B deck engine (Rebuilt in 2004)
• Coolers Redone
• Long Tower
• Mounted on CCC (Crane Carrier Company) Truck
• Detroit 6-71 T engine
• Jake brakes
• FOB: PA
• PRICE: Please contact us for more information.

• 1983 Driltech D-25K2:
• Sullair 750 psi / 250 psi compressor
• CAT 3406 deck engine at 325 HP
• 25 ft. Stroke
• New Rotation Pump
• New Feed Pump in 2006
• Helpers Controls
• (1) 8" Hammer
• (1) 6" Hammer
• Tools
• Mounted on a CCC (Crane Carrier Company) Truck
• CAT 3208 engine with 13 speed transmission
• New front tires and recap back tires
• FOB: PA
• PRICE: Please contact us for more information.

• Rebuilt Driltech D-40K:
• Remanufactured CAT C-15 Deck engine
• New Sullair 1150 cfm / 350 psi compressor
• New water injection pump
• New hydraulics
• Valve bodies
• New hoses
• Rebuilt power divider
• New hold back & pull down chains
• Over size mast cylinders
• New sprockets
• New gages
• Mast stretched and stiffened to handle 30' drill pipe and Range 2 casing
• 90,000lb holdback capacity
• Jib crane pivots and extends
• Mounted on a CCC (Crane Carrier Company) Truck (stretched and two more hyd. jacks added to center of truck)
• Has drilled only 1100' since rebuilt
• 700 gallon Auxiliary diesel tank mounted to top deck, (quick connect hoses hook directly to rig fuel system)
• (72) Brand New Drill Pipe (30 X 4 1/2" X 2 7/8" IF)
• New 12" surface bit
• New 12" stabilizer
• New 6 1/2" bit
• New 6" stabilizer
• New DHH with 6 3/4" bit (less than 350' on DHH)
• (5) new check valves
• Blooie line with valve
• 8 5/8" BOP
• 7" BOP
• Set of 8 5/8" casing spinners
• Set of 7' casing spinners
• Set of 4 1/2" casing spinners
• Cementers for both sizes
• All forks, wrenches, and plugs for handling drill pipe
• Also included: as shown in pictures
• Ford 8000 rod truck included
• 45' Fontaine 3 axel drop deck trailer included
• FOB: Mid-West, USA
• PRICE: Please contact us for more information.

• 2004 Driltech T25KW:
• 1000 cfm / 350 psi air compressor
• CAT C-15 deck engine with 525 HP
• 20 G.P.M Water Injection
• 10 gallon DHD Lube Injection
• Driller and helper side mounted winch controls
• Let down side walkways
• Rotary head torque control
• Stabilizer storage throut
• Rotation Control modified for drillers comfort
• 2004 Sterling LT9500 6x4 Truck
• Mercedes Benz 4000 with 370 hp engine
• Jake brakes
• Ten speed transmission
• Differential and Interaxle lock
• A/C (Air Condition)
• Cruise control
• FOB: West Coast, USA
• PRICE: Please contact us for more information.

SOLD - Please call for similar rigs now available.

SOLD - Please call for similar rigs now available.

• 1998 Driltech T25K5W:
• 6,500 operating hours
• Mounted on a 1997 Ford Sterling 6X4 Chassis (17,000 miles) P/B Cummins 300 HP Engine
• CAT 3406E Deck Engine (under 1,000 hours on inframe overhaul)
• Sullair 900 cfm / 350 psi Compressor with Disconnect Clutch
• New Compressor Coupling
• Six Rod Carousel Set-Up to Handle 4-1/2" O.D. X 20' Drill Pipe
• Bean 18 GPM Water Injection Pump
• DHD Lubricator
• 28' Stroke Tophead Drive with 30,000 Lb. Pullback
• New Drill Pipe Rack
• Helper's Station Jib & Winch Controls
• FOB: South Region, USA
• PRICE: Please contact us for more information.

SOLD - Please call for similar rigs now available.

---

**********SOLD**********
Driltech T-25K4W 1997

SOLD - Please call for similar rigs now available.

ITEM # DT-12

• 1997 Driltech T-25K4W:
• LN8000 Ford truck with Cummins engine 300
• Sullair air compressor 900psi / 350cfm
• 3406 E. engine
• Braden winch 7,000 lbs
• PRICE: Please contact us for more information.

SOLD - Please call for similar rigs now available.

---

**********SOLD**********
Driltech D25KW 1995

SOLD - Please call for similar rigs now available.
ITEM # DT-19

• 1995 Driltech D25KW:
• Rebuilt CAT 3406 DITA deck engine
• Sullair 840 cfm / 350 psi compressor
• 30,000 Pullback
• 1995 Ford LN8000
• Cummins Diesel 300HP with 43,500 miles
• Winch
• 6 Pod Carousel
• 20 Gallon Bean Water Pump
• Oiler
• FOB: N.E. Region
• PRICE: Please contact us for more information.

SOLD - Please call for similar rigs now available.

---

**********SOLD**********
Driltech D25K3W 1994

SOLD - Please call for similar rigs now available.
ITEM # DT-23

• 1994 Driltech D25K3W:
• 5400 hours
• 900 CFM / 350 PSI Sullair air compressor
• Caterpillar 3406DITA deck engine
• Piston air 5 X 6 mud pump
• 30,000 lbs. pullback
• 28' head travel
• Water injection
• Rod handling winch
• 6 rod carousel
• Top head drive
• Angled side rod rack
• Four outriggers
• Tool box included
• Drill Pipe (available at additional cost)
• Mounted on 1994 Mach truck
• 41,200 miles
• Mack 300 hp diesel engine
• T2070 transmission
• 8 speed transmission
• Jake brake
• FOB: Mifflinburg, Pennsylvania, USA
• PRICE: Please contact us for more information.

SOLD - Please call for similar rigs now available.

---

**********SOLD**********
Driltech TM40 1992

SOLD - Please call for similar rigs now available.

ITEM # DT-14

• 1992 Driltech Model TM40:
• S/N# 731807 mounted on 1992 Ford LNT8000 Truck
• VIN# 1FDZW832A3NVA29329
• 270 HP Diesel Engine
• 10 Speed Transmission
• 18,000 Lbs Front Axle
• 46,000 Lbs Rear Axle
• Delivered with:
• Sullair 1000 cfm / 350 psi Drill Compressor
• CAT 3408 DITA 490 HP Deck Engine
• 89 RPM 72,000 Lbs Torque Head
• 28' Mast Stroke 50,000 lbs. Holdback Pressure
• (2) Drill Pipe Loaders (inside/outside) 6 pieces each 4.5" OD X 25' Pipe
• Remote Helpers Station
• Airline Blowdown / Relief System
• 20 GPM Water Injection
• Blue White Foam Injection Group
• Airline Lubricator
• 172 degree Swing Jib Boom
• (2) 48" Front Jacks, (2) 36" Rear Jacks
• 7,500 lbs Hydraulic Winch
• Drilling Accessories
• Observed Odometer: 47,727 Miles
• Observed Drill Hour Meter: 3972 Hours
• PRICE: Please contact us for more information.

SOLD - Please call for similar rigs now available.

---

**********SOLD**********
Driltech DK-25 1990

SOLD - Please call for similar rigs now available.

ITEM # DT-9

• DK-25 Driltech 1990:
• 900cfm / 350psi GHH compressor
• Cat 3406 power unit
• 400 feet of drill pipe
• Good use hammer
• Assortment of drill bits
• Mounted on a Ford L8000 truck
• Excellent overall condition
• Ready to go to work
• PRICE: Please contact us for more information.

SOLD - Please call for similar rigs now available.

---

**********SOLD**********
Driltech T25KW 1990

SOLD - Please call for similar rigs now available.

ITEM # DT-8

• Driltech T25KW:
• 840 / 350 GHH Compressor
• 3406 Cat Diesel Deck Engine
• Air Operated Lubricator
• 20 GPM Water Injection
• 6 Pod Lazy Susan
• Jim Boom
• Tool box
• 48" breakout wrench
• 13 speed road ranger transmission
• 1000' of 4 1/2" X 3 1/2" API X 20' pipe, bushings
• Hoist box with bails
• 6" mission hammer with bit
• 8" drillmaster hammer with 11" bit
• 3792 hours on deck engine since rebuild
• 2129 hours on compressor since rebuild
• Mounted on 88' Ford L8000, w/ Ford Diesel
• Very Good Condition.
• PRICE: Please contact us for more information.

SOLD - Please call for similar rigs now available.

---

**********SOLD**********
Driltech D25K 1990

SOLD - Please call for similar rigs now available.

ITEM # DT-7

• Driltech D25K 1990
• 900cfm / 350psi GHH air compressor
• 3406 deck engine
• Mounted on Ford 8000 truck with 7.3L diesel engine
• Used 6" hammer and bit
• Handling tools
• Excellent condition
• PRICE: Please contact us for more information.

SOLD - Please call for similar rigs now available.

---

**********SOLD**********
Driltech D40K 1990

SOLD - Please call for similar rigs now available.

ITEM # DT-6

• Driltech D40K Deep Hole Package 1990
• 1160cfm / 350psi Sullair, completely rebuilt 2003
• Cummins K19A on deck (600 hp), 2000 hours since rebuild
• 70,000 pounds pullback
• Auxiliary air piping, 24 volt system
• New feed pump
• 20" table opening
• New top chains and sprockets
• Bean water injection pump, 18 gpm
• DHD oiler
• Mounted on 1990 International Paystar 5000 with 350 Cummins (33,000 miles)
• PRICE: Please contact us for more information.

SOLD - Please call for similar rigs now available.

---

**********SOLD**********
Driltech T25K2W 1987

SOLD - Please call for similar rigs now available.

ITEM # DT-11

• Driltech T25K2W 1987:
• Year: 1987
• Make: Ford
• Model: LNT8000
• Stock #: 1410
• VIN: 1FDYW82A9HVA25017
• Mileage: 40,851
• Hours: n/a
• FAWR: 18,000
• RAWR: 46,000
• GVWR: 64,000
• Color: Yellow
• Engine: 240 HD Diesel Year: 1987
• Transmission: 7 Speed Eaton Fuller Make: Drilltech
• Front Tires: 425/65R22.5 Model: T25K2W
• Percentage: 80% S/N: 650TWGH08693
• Rear Axle Ratio: n/a Engine: Cat Diesel 3406
• Rear Suspension: Leaf Spring Compressor: 840 CFM @ 350 PSI
• Rear Tires: 11R22.5 Pullback: 29,400 lbs
• Percentage: 70% Attachment: 9 pcs 20' pipe
• Tag/Pusher Axle: No Bed Size: n/a
• Tag/Pusher Tires: n/a Tool Box: yes
• Wheels: Steel
• Fuel Tank: 75 Gallons
• Air Conditioning: Yes
• Differential Lock: Yes
• Engine Brake: Yes
• PRICE: Please contact us for more information.

SOLD - Please call for similar rigs now available.

---

**********SOLD**********
Driltech D40K 1986

SOLD - Please call for similar rigs now available.

ITEM # DT-18

• 1986 Driltech D40K
• CAT 3408 Engine
• Sullair 900 cfm / 350 psi compressor
• 40,000 Lb. Pullback
• Six Rod Carousel Set-Up for (4-1/2" O.D. X 25') Drill Pipe
• Water Injection Pump
• DHD Lubricator
• International Paystar 5000 Chassis truck
• FOB: Mid-West USA
• PRICE: Please contact us for more information.

SOLD - Please call for similar rigs now available.

---

**********SOLD**********
Driltech T25K-II 1983

SOLD - Please call for similar rigs now available.

ITEM # DT-15

• Driltech T25K-II 1983:
• Serial Number 731035
• Air Compressor 750 cfm / 350 psi
• CAT 3408 deck engine
• Hours: 9,679
• Water Pump (Bean 20 GPM)
• 6 Rod Carousel
• Electric Hammer Oilier
• 1 Winch
• International Truck 1978
• 15,775 miles
• CAT engine
• 3 axles
• Rig fully tooled to drill a 10" & 6" bore hole
• "As Is, Where Is"
• FOB: PA
• PRICE: Please contact us for more information.

SOLD - Please call for similar rigs now available.

---

**********SOLD**********
Driltech D40K 1978

SOLD - Please call for similar rigs now available.

ITEM # DT-16

• Driltech D40K 1978:
• 3406 Cat engine
• 750/300 compressor
• The drill is in very good condition
• Call for details
• PRICE: Please contact us for more information.

SOLD - Please call for similar rigs now available.

---

**********SOLD**********
Driltech D40K2 USED

SOLD - Please call for similar rigs now available.
ITEM # DT-27

• 1985 Driltech D40K2:
• 850 cfm / 350 psi air compressor
• CAT 3406 engine with 575-600 HP
• Mounted on a CCC (Crane Carrier Company) truck
• CAT 3208 engine
• 1,000 ft of Drill Pipe (25' X 4 1/2") available but (sold separately)
• FOB: Mid-West, USA
• PRICE: Please contact us for more information.

SOLD - Please call for similar rigs now available.

---

Contact Info: (800) 828-6131 or (949) 722-8643
Fax: (949) 722-2561   Email: EWDrill@yahoo.com
PLEASE INCLUDE YOUR PHONE, FAX & COUNTRY.

Back to Top                           BACK TO INDEX (HOME PAGE)                           Back to Top