FAILING
Failing
1250
USED
PICTURES - click to enlarge in new
window -
ITEM # F-12
- Failing 1250:
- Retractable Table
- 400' - 2 3/8" FEDP Drill Pipe
- Custom Tool Boxes
- Tire Boss - Tire Air System - (Inflate/Deflate for rough terrain)
- New 2007 Deutz 200hp Deck Engine
- New 2006 IR Air Compressor 125 Enclosed
- 5x6 Failing Mud Pump
- Mounted on 1995 International 4900
- Addition Reserve 200gallon Fuel Tank
- Rig was completely refurbished and rebuilt
- Mast is only original part on rig
- New Hydraulics, tool boxes, Deck motor, hose reel and hose, etc.
- FOB: South Region, USA
- PRICE: Please contact us for more information.
Failing
1250
USED
PICTURES - click to enlarge in new
window -
ITEM # F-13
- Failing 1250:
- Mounted on 1991 Chevy top-kick truck
- V-8 gas engine with 350 HP (Runs off the PTO)
- Mud Pump 5" intake
- Some new spare parts included
- 1,000 ft of drill pipe (sold separately)
- FOB: CA
- PRICE: Please contact us for more information.
Failing
1500
USED
PICTURES - click to enlarge in new
window -
ITEM # F-10
- Failing 1500:
- Mounted on a 1989 Chevy Truck
- Rebuilt 366 gas engine
- Gardner Denver 5 X 6 Mud Pump
- 38' mast
- FOB: South Region, USA
- PRICE: Please contact us for more information.
Failing
1250
USED
PICTURES - click to enlarge in new
window -
ITEM # F-9
- Failing 1250:
- Mounted on a 1995 International 4300 Truck
- Diesel engine
- 4 hydralic jacks
- 990A Dresser air
- 5 X 6 Failing mud pump.
- Third line.
- 300 ft. of (20' X 3 1/2 ") drill pipe
- FOB: Mid-West Region, USA
- PRICE: Please contact us for more information.
Failing
1250
USED
PICTURES - click to enlarge in new
window -
ITEM # F-8
- Failing 1250:
- 1,300+ Hours
- Cummins 250 engine
- 5 x 8 Gardner Denver mud pump (new deck and pump clutch)
- New jack stand and chain
- Military 6 X 6 truck with over 130,000 miles
- FOB: South Region, USA
- PRICE: Please contact us for more information.
**********SOLD**********
Failing
1250 Holemaster
1980
SOLD - Please call for similar rigs now available.
ITEM # F-7
- 1980 Failing 1250 Holemaster:
- Mounted on a 1980 1954 International 6X4 Chassis P/B International DT466 210 HP Engine
- Hydraulic Chain Pulldown
- Gardner Denver 5' X 8' Mud Pump
- Retractable 5-1/2" Rotary Table
- Three Hydraulic Leveling Jacks
- Friction Clutches on Drawworks
- Bailing Drum
- No Pipe Rack
- Handles 20’ Drill Pipe
- FOB: South Region, USA
- PRICE: Please contact us for more information.
SOLD - Please call for similar rigs now available.
**********SOLD**********
Failing
1250
1980
SOLD - Please call for similar rigs now available.
ITEM # F-2
- Failing 1250, 1980:
- Mounted on 1984 International truck with 466 diesel engine
- 13 speed transmission
- Leroy 600 cfm / 100 psi compressor
- Gardner Denver 5x6 mud pump
- 23' kelly
- 300' of drill pipe
- Rig and truck are in very good condition, very well maintained
- PRICE: Please contact us for more information.
SOLD - Please call for similar rigs now available.
**********SOLD**********
Failing
1250
1972
SOLD - Please call for similar rigs now available.
ITEM # F-6
- Failing 1250 1972:
- S/N 902789
- Mounted on a used 1972 Mack R401 Tandem Truck
- S/S R737ST1586 with 250 Cummins Diesel engine
- 10 speed transmission
- Equipped with 5x6 mud pump
- Gardner Denver 580 Air compressor
- 3 hydraulic jacks
- 5-1/4" retractable table
- 10' pipe rack
- Hydraulic pull down
- 3-3/8 x 23' Kelly with 2-3/8 IF saver sub
- Drillers platforms and double drum draw works with 2 part lines
- Accessory equipment includes:
- 280' of 2-3/8 IF x 20 pipe
- 1 - Hoist Plug
- 1 - Bit sub 4-1/2 Reg.
- 1 - Bit sub 2-7/8 Reg.
- 1 - Set breakout slips
- PRICE: Please contact us for more information, FOB: Mifflinburg, PA
SOLD - Please call for similar rigs now available.
**********SOLD**********
Failing
1250
1972
SOLD - Please call for similar rigs now available.
ITEM # F-4
- Failing 1250 1972
- 1972 international tandem axle truck
- International diesel motor 8 cylinder, leaks no oil
- Tires in good shape
- Flotation's on front
- Three hydraulic jacks
- 3 x 4 centrifugal mud pump just re-built
- Little giant swivel 2.5 discharge a year old
- 2.5" plumbing
- 50sds air compressor with cooler
- Single stage 750cfm / 50psi
- Dual stage 250cfm / 120psi
- New Kelly
- 7.5" Mayhew table a year old
- Air clutches
- 300' of 2 3/8" drill rods
- Water injection
- 12' x 6" bar with 8.5" bit with its own slide
- 4.5 rock and sub
- Quick plug for rods
- Mud pan
- Completely tooled to drill 5" PVC wells
- New paint job
- Rebuilt table transmission and clutch new this year
- Rebuilt pull-down box new this year
- New pull-down sprockets
- Lots of new parts on this rig not listed
- Have drilled up to 700' with this rig
- Rig is very sound and ready to drill
- PRICE: Please contact us for more information.
SOLD - Please call for similar rigs now available.
**********SOLD**********
Failing
1500
1969
SOLD - Please call for similar rigs now available.
ITEM # F-5
- Failing 1500, 1969:
- Mounted on 1968 White tandem axle truck
- Rig has 5 x 8 Gardner Denver mud pump
- Rotary type head with hydraulic pull down
- Derrick has been recently rebuilt
- It's 67 feet tall and is able to set up to 50 ft. casing
- Rig has new line, new blocks, new crown and sheaves
- Rig is now capable of drilling 2000 feet with 2 3/8" drill pipe
- Rig has a lay down trailer for pipe with lay down chain
- All drill pipe is 20 foot in length, 67 joints, 2 3/8" with 2 3/8" IF thread
- Also includes 44 pieces of 2 3/8" by 20 foot flush joint pipe
- Have four 4" by 20 foot drill collars and one 6" by 20 foot drill collar
- The rig is complete with 30 years worth of subs, changeovers, drag bits of various configurations, tri-cone bits of various sizes, elevators, blocks, slips
- Have all manuals and parts books
- Rig is in good shape and is ready to go to work
- No table drive
- The kelly slides through the drive head
- The slip holder and slips are retractable
- Also included is a 1965 Kenworth tandem axle water truck with 3000 gallon water tank
- Available in MT, USA
- PRICE: Please contact us for more information.
SOLD - Please call for similar rigs now available.
**********SOLD**********
Failing
1250
1969
SOLD - Please call for similar rigs now available.
ITEM # F-3
- Mounted on 1972 Mack R401 with 250 Cummins diesel
- 10 speed transmission
- 5x6 mud pump
- Gardner Denver 580 air compressor
- 5 1/4" retractable table
- Pipe rack
- Hydraulic pulldown
- 3 3/8" x 23' kelly with 2 3/8" IF saver sub
- Driller platforms
- Double drum drawworks with 2 part lines
- 3 hydraulic jacks
- 280' of 2 3/8" x 20' pipe
- PRICE: Please contact us for more information.
SOLD - Please call for similar rigs now available.
**********SOLD**********
Failing
1250 (CFD-1B)
USED
SOLD - Please call for similar rigs now available.
ITEM # F-11
- Failing 1250 (CFD-1B):
- Gardener Denver 475 cfm / 175psi air compressor
- Can use (20' x 2 3/8" IF) Drill Pipe
- Subs stablizers 6" and 8" and a
- Willden M 15 mud pump
- Fully Serviced in 2004
- Mounted on a 1985 MACK Truck
- Mack engine
- FOB: Mid-West, USA
- PRICE: Please contact us for more information.
SOLD - Please call for similar rigs now available.
**********SOLD**********
Failing
1500
USED
SOLD - Please call for similar rigs now available.
ITEM # F-1
- Mounted on 1975 International 1600 truck
- 345 IH engine
- 5x6 mud pump
- 3 hydraulic jacks
- Retractable table
- 40 ft. derrick
- Kelly
- Stabilizer
- 700 ft. of 20 ft. drill stems
- Engine runs great
- PRICE: Please contact us for more information.
SOLD - Please call for similar rigs now available.
Contact Info: (800) 828-6131 or (949) 722-8643
Fax: (949)
722-2561 Email: EWDrill@yahoo.com
PLEASE INCLUDE YOUR PHONE, FAX &
COUNTRY.
Back to Top
BACK TO INDEX (HOME PAGE)
Back to Top